 |
Connector (4970)
Weight: 7 lbs. (3 kg)
|
Single Line Kit (701184-1)
Weight: 54 lbs. (24.5 kg)
Consists of a top and bottom support and a wheel assembly. This kit makes a 3 or 5 ft (1 0r 1.5 m) section into a 750 lb. (340.2 kg) maximum load single line work cage, using endgates to finish the cage.
|
 |
End Adapter/Stirrup with Casters (4971)
Weight: 37 lbs. (17 kg)
|
 |
Low Profile Stirrup or Walk-by Stirrup (701200-1)
Weight: 110 lbs. (49.9 kg)
Requires less head room below anchor point
|
 |
Zmac/1000® Stirrup (700958-1) |
 |
Walk Thru Stirrup (008810-1) |
 |
Zmac/1000® Adapter (700956-1)
Weight: 16 lbs. (8 kg)
|
 |
Hinge Section (700229-1)
Weight: 40 lbs. (18.1 kg)
Required on straight platforms with three or more hoists to prevent overloading of any one hoist of suspension point
|
 |
90° Adapter (8-0278)
Weight: 3 lbs. (1.4 kg)
Used with Walk Thru Stirrup (008810-1)
|
 |
Walk Thru Stirrup Wheel Assembly (700777-1)
Weight: 12 lbs. (5.4 kg)
|
 |
20° Adapter (8-0406)
Weight: 3 lbs. (1.4 kg)
Used with Walk Thru Stirrup (008810-1) |
 |
Cross Beam Assembly (93-001)
Use 2-731 stirrup for SC1000 and Zmac/1000® hoists and BB-002 for SC30 and SC40 hoists.
|
 |
Corner Adapter (008812-1)
Weight: 118 lbs. (53.5 kg)
|
 |
Endgate Assembly (008811-1)
Weight: 12 lbs. (5.4 kg)
|
